DIEMASTER SERIES ROTARY DIECUTTERS


DieMaster RR Series
High-Speed Rotary Die Cutter with
Web Re-registration Capability


click on picture for larger image


High Speed Re-registration Diecutting/Converting.

Materials pre-printed using a variety of roll printing technologies may be rotary die cut, perforated, laminated and even digitally imprinted using the servo driven technology of the DieMaster RR high speed rotary diecutter.

  STANDARD EQUIPMENT:
   OPTIONAL EQUIPMENT:
  • Dual-Servo precision web re-registration system with electronic sensor, and user-friendly touch-screen control panel. 

  • Available in 10" (254mm), 13" (330mm), 18" (457mm), and 20" (508mm) wide models 500 feet/minute (152 M/minute) max. web speed 

  • 40" (1016mm) diameter Unwind, 3" diameter inflatable spindle, Splice Table, and pneumatically controlled disk brake with Automatic End-of-Roll Shutoff 

  • (2) 16" (406mm) max. diameter Rewinds, with 3" diameter EZ-Change inflatable spindles (24" (636mm) max. diameter when ran to single spindle) 

  • Interchangeable slitting station module with choice of rotary shear or razor (pneumatic crush extra). 

  • (2) Fully-supported and duel side framed invertible Rotary Die Stations, complete with fully hardened anvil rollers and die blocks. 

  • 26" (660mm) diameter pneumatic Waste Windup with 3" diameter inflatable spindle 

  • Accuweb Ultrasonic web guide for processing both clear and opaque materials. 

  • Programmable multi-function counter. 

  • Synchronized Inspection Strobe. 

  • Interchangeable Slitting Station module with choice of Rotary Shear, Razor, or Pneumatic Crush Slitting. 

  • Fanfolder, Conveyor and Stacker adaptable for roll-to-sheet converting.

 
  • PLC controlled tension with operator-friendly touch screen. 
  • Flexographic printing and coating stations with hot air, IR, and/or UV drying. 

  • Additional fully-supported and duel side framed die station with fully hardened anvil roller and die blocks.

  • 20" (508mm) diameter Top-side Lamination Tower with roll noise reducer, 3" diameter inflatable spindle and pneumatic nip station 

  • Liner rewind with 3" diameter inflatable spindle for Top-Side Lamination Tower 

  • Small size die adapters to utilize 1/8cp dies smaller than the machine size 

  • Adjustable underscore unit 

  • Additional 26" (660mm) diameter pneumatic waste windup. 

  • Hydraulic unwind roll lift/loader. 

  • Die pressure equalizers designed to keep consistent pressure at both ends, significantly extending die life. 

  • Die lift systems to safely load and unload dies and rollers, avoiding injury and die damage. 

  • 5" Removable Shingle Conveyor with programmable batch counter

  • Removable Bottom Stacker 

  • Removable Fanfolding Module 

  • May be customized to precise needs.